BenchK

BenchK 521 is a wall bar with a permanently mounted pull up bar.

It has been made by combining solid beech wood with metal, creating a piece of sports furniture perfectly fitting into every interior.

The rungs have been made from the highest quality beech wood and hand oiled. The sides are made of single metal profiles (40×50 mm/1³⁷⁄_64”  x 1³¹⁄_32”, 20mm/0⁵⁄_64″ thick), powder coated white matte.

The wall bars can be mounted either to wall or between floor and ceiling. The bottoms of the profiles have been covered by masking frames, which guarantees safety and adds to the aesthetics of the wall bars.

The advantage of BenchK 521 is an additional rung at the top between the pull up bar consoles, which allows for additional exercises.

Assembly set is included (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. There are two options for mounting the wall bars: to the wall and  floor-to-ceiling. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations. For stud wall construction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Maximum user weight: 150 kg/330 lbs
Width: 67 cm/26⅛″
Height: 2,40 m/94½″
Ceiling height for floor to ceiling mounting: from 2,40/94½″ m to 2,72 m/107⅛″
Ceiling height for wall mounting: from 2,40 m/94½″
Mount type: to wall or floor to ceiling
Weight: 27 kg/59 lbs
Colour: white
Material: metal, beech wood
Warranty for metal elements: 10 years
Warranty for other elements: 2 years

Assembly instructions

BenchK 5 Series wall bars assembly instructions

See / Download the manual

Exercise Video

Gymnastic wall bars BenchK 521 comes with a permanently fixed pull-up bar. The wall bars are available in black and white and combines solid beech wood and steel, creating a piece of sports furniture that perfectly matches every interior.

The wall bars rungs are made of the highest quality beech wood and hand oiled  with two layers of organic oil, based on linseed oil which is approved for contact with food. The side steel profiles, 40x50mm/1³⁷⁄_64”  x 1³¹⁄_32” rectangles of 20mm/0²⁵⁄_32″ thickness, are powder coated black matte.

The wall bars can be mounted to wall or between floor and ceiling. An asset of BenchK 521 is an additional rung placed at the pull up bar height, which allows for a more varied range of exercise.

BenchK 521 can be equipped with dip bar BenchK DB1 and/or workout bench B1.

Assembly set is included (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. There are two options for mounting the wall bars: to the wall and  floor-to-ceiling. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations. For stud wall construction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Maximum user weight: 150 kg/330 lbs
Width: 67 cm/26⅛″
Height: 2,40 m/94½″
Ceiling height for floor to ceiling mounting: from 2,40 m/94½″ to 2,72 m/107⅛″
Ceiling height for wall mounting: from 2,40 m/94½″
Mount type: to wall or floor to ceiling
Weight: 27 kg/59 lbs
Material: steel, beech wood
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Assembly instructions

BenchK 5 Series wall bars assembly instructions

See / Download the manual

Exercise Video

BenchK 700 wall bars is a modern take on a classic wooden wall bars. By combining solid beech wood and metal we created a piece of sport furniture, that will perfectly fit into a modern interior.

The rungs are made of the highest quality beech wood. The rungs, made of solid beech wood, are not varnished but are hand-oiled with two layers of organic oil, based on linseed oil which is approved for contact with food. The metal profiles, 40 x 50 mm/1³⁷⁄_64”  x 1³¹⁄_32″ and 2cm/0⁵⁄_64″ thick are powder coated black matte.

Each oval slot in the metal profile has a plastic bush. Not only does it improve the aesthetics, but also protects the wooden rung. Each cuts and holes are made with a laser, which guarantees precision and ideal shape.

Assembly set is included (does not include wall mounting set, as its type depends on the type of wall which the wall bar will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations.

For stud wall construction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

The set includes: wall bars (gymnastic ladder)

Maximum user weight: 150 kg (330 lbs)
Width: 67 cm (26 3⁄8″)
Height: 240 cm (94 ½″)
Weight: 20kg (44 lbs)
Minimum installation height: 250 cm (98 ½″)
Mount type: to wall
Color: white matt
Material: steel, beech wood
Warranty for metal elements: 10 years
Warranty for other elements: 2 years

Assembly Instructions

BenchK 700 wall bars is a modern take on a classic wooden wall bars. By combining solid beech wood and steel we created a piece of sport furniture, that will perfectly fit into a modern interior.

The rungs are made of the highest quality beech wood. In order to keep the warmth and original texture of natural wood, the rungs made of solid beech wood, are not varnished but are hand-oiled with two layers of organic oil, based on linseed oil which is approved for contact with food.

Each oval slot in the steel profile has a plastic bush. Not only does it improve the aesthetics, but also protects the wooden rung. Each cuts and holes are made with a laser, which guarantees precision and ideal shape.

Assembly set is included (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations.

For stud wall construction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

The set includes: wall bars (gymnastic ladder)

Maximum user weight: 150 kg (330 lbs)
Width: 67 cm (26 3⁄8″)
Height: 240 cm (94 ½″)
Weight: 20kg (44 lbs)
Minimum installation height: 250 cm (98 ½″)
Mount type: to wall
Color: black matt
Material: steel, beech wood
Warranty for metal elements: 10 years
Warranty for other elements: 2 years

Assembly Instructions

The BenchK 100 wall bars in the room motivates the user to undertake physical activity. The wall bars serves adults and children alike. The wooden BenchK 100 wall bars is a noteworthy piece of sports furniture. It can be used by any user, regardless of age and physical fitness, weighing up to 120 kg/265 lbs. The BenchK 100 will help improve the physical development of parents and can encourage children to move. Regular exercise on this gymnastic wall bars will contribute to the development of different muscle groups, spine and joint flexibility. Exercising together is a good idea to spend time with the family.

It takes up little room as only 0.5 m2/5.3 ft² is required for its installation.

This gymnastic wall bars is made of high quality beech wood with the use of modern manufacturing technologies, which ensures a smooth surface and perfectly fitting elements. It has been hand oiled with oil that is safe for food handling environments.

Includes an assembly kit (does not include wall mounting set, as its type depends on the type of wall which the wall bars will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations. For stud wall contruction houses, it is required to use BenchK WH1 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

The set includes: wall bars (gymnastic ladder)

Maximum user weight:120 kg (265 lbs)
Width: 64 cm (25¼″)
Height: 2,20 m (86⅝″)
Minimum ceiling height: 2,30 m (90½″)
Mount type: to wall
Weight: 14 kg (30.9 lbs)
Color: light beech
Material: solid beech wood
Warranty: 2 years

Assembly instructions

BenchK 200W gymnastic wall bar is a solid and practical model. It has compact dimensions, thanks to which it will be perfect for any room. BenchK 200W gymnastic wall bar occupies only about half a square meter/5.38 ft². Its basic role is to inspire children, adolescents and adults to undertake various physical activities.

The hand oiled wooden rungs made of highest quality solid beech wood together with white matte metal elements create a unique stylish piece of sports furniture.

The wall bars may be used for a variety of stretching and relaxation exercises or a more challenging workout with the use of resistance bands or TRX straps.

BenchK 200W can be equipped with:

• PB 204 wooden pull up bar
• PB2W metal pull up bar
• A204 gymnastic accessories

Assembly set included (does not include wall mounting set, as its type depends on the type of wall which the wall bar will be attached to). The decision and responsibility for the method of installation of the wall bars rests with the customer. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations.

For stud wall construction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

The set includes: wall bars (gymnastic ladder)

Maximum user weight: 150 kg (330 lbs)
Width: 67 cm (26 3⁄8″)
Height: 230 cm (90 1⁄2″)
Weight: 81 kg (80 lbs)
Minimum installation height: 240 cm (94 ½″)
Mount type: to wall
Color: white matt
Material: steel, beech wood
Warranty for metal elements: 10 years
Warranty for other elements: 2 years

Assembly instructions

BenchK 200B gymnastic wall bars available in black and white is a solid and practical model. It has compact dimensions, thanks to which it will be perfect for any room. BenchK 200B gymnastic wall bars occupies only about half a square meter. Its basic role is to inspire children, adolescents and adults to undertake various physical activities.

The rungs, made of solid beech wood, are not varnished but are hand-oiled with two layers of organic oil, based on linseed oil which is approved for contact with food.

The wall bars may be used for a variety of stretching and relaxation exercises or a more challenging workout with the use of resistance bands or TRX straps.

Assembly set included (does not include wall mounting set, as its type depends on the type of wall which the wall bar will be attached to). The decision and responsibility for the method of installation of the wall bar rests with the customer. Wall mounting is not possible to a plasterboard wall. The minimum required wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In all other cases, it is a recommended thickness only. For other wall fixings please see manufacturers recommendations.

For stud wall construction houses, it is required to use BenchK WHB+S8 or WHW+S8 wall holder for a wall bar to have it safely secured to the wall.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

The set includes: wall bars (gymnastic ladder)

Maximum user weight: 150 kg (330 lbs)
Width: 67 cm (26 3⁄8″)
Height: 230 cm (90 1⁄2″)
Weight: 18 kg (39 lbs)
Minimum installation height: 240 cm (94 ½″)
Mount type: to wall
Color: black matt
Material: steel, beech wood
Warranty for metal elements: 10 years
Warranty for other elements: 2 years

Assembly instructions

Can be attached directly to the rungs of any BenchK wallBars thanks to 4 felt lined hooks. Felt line hooks allow the Dip Bar to be removed and replaced easily without marking.

The height of the Dip Bar can be easily adjusted for the comfort of any user. The armrests and the back support are made entirely from polyurethane (PU) guaranteeing a durable, aesthetic and easy to maintain finish.

The BenchK Dip Bar available in black and white has a solid construction with a 50×40 mm/1³¹⁄_32″ x 1³⁷⁄_64″ profile with a thickness of 2 mm/0⁵⁄_64″. The four hand grips are hardwearing yet and extremely comfortable to hold.

BenchK Dip bar DB1 is designed especially for the BenchK series 7 wallBars, but it is also compatible with all steel BenchK wallBars series.

Specifications

Maximum user weight: 150 kg/330 lbs
Weight: 11 kg/24 lbs
Colour: black/white
Material: steel, polyurethane
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Exercise Videos

Can be attached directly to the rungs of any BenchK wallBars thanks to 4 felt lined hooks. Felt line hooks allow the Dip Bar to be removed and replaced easily without marking.

The height of the Dip Bar can be easily adjusted for the comfort of any user. The armrests and the back support are made entirely from polyurethane (PU) guaranteeing a durable, aesthetic and easy to maintain finish.

The BenchK Dip Bar available in black and white has a solid construction with a 50×40 mm/1³¹⁄_32″ x 1³⁷⁄_64″ profile with a thickness of 2 mm/0⁵⁄_64″. The four hand grips are hardwearing yet and extremely comfortable to hold.

BenchK Dip bar DB1 is designed especially for the BenchK series 7 wallBars, but it is also compatible with all steel BenchK wallBars series.

Specifications

Maximum user weight: 150 kg/330 lbs
Weight: 11 kg/24 lbs
Colour: black/white
Material: steel, polyurethane
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Exercise Videos

The pull up bar PB3 available in black and white has 4 felt lined hooks to prevent marking the wooden rungs. Thanks to its removable construction, the pull up bar can be positioned at different height and adjusted to the height of the user. The the pull up bar is rotated it can be used as a barbell rest. The maximum weight of the barbell is 200kg/441 lbs.

The profile construction is 50x40mm/1³¹⁄_32″ x 1³⁷⁄_64″ with the steel thickness of 2 mm/⁵⁄_64″ and pipe with a diameter 27,2 mm/1⁵⁄₆₄. We have paid attention to every small detail and the quality finish.

BenchK steel Pull up bar PB3 is designed especially for the BenchK series 7 wall bars, but it is also compatible with all steel BenchK wall bars series.

Specifications

Maximum user weight: 200 kg/441 lbs
Width: 116,5 cm/45⁵⁵⁄_64″
Weight: 11 kg/24 lbs
Colour: white
Material: steel, polyurethane
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Exercise Videos

The pull up bar PB3 available in black and white has 4 felt lined hooks to prevent marking the wooden rungs. Thanks to its removable construction, the pull up bar can be positioned at different height and adjusted to the height of the user. The the pull up bar is rotated it can be used as a barbell rest. The maximum weight of the barbell is 200kg/441 lbs.

The profile construction is 50x40mm/1³¹⁄_32″ x 1³⁷⁄_64″ with the steel thickness of 2 mm/⁵⁄_64″ and pipe with a diameter 27,2 mm/1⁵⁄₆₄. We have paid attention to every small detail and the quality finish.

BenchK steel Pull up bar PB3 is designed especially for the BenchK series 7 wall bars, but it is also compatible with all steel BenchK wall bars series.

Specifications

Maximum user weight: 200 kg/441 lbs
Width: 116,5 cm/45⁵⁵⁄_64″
Weight: 11 kg/24 lbs
Colour: black
Material: steel, polyurethane
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Exercise Videos

The BenchK D8 pull up bar / dip bar are made of high-quality powder-coated metal, and the armrests and backrest are made of polyurethane, which provides increased comfort during exercise. The non-slip hand grips are ergonomically shaped, making them fit perfectly in the hand.

The BenchK D8 serves not only as a pull-up bar, but also as exercise bars. The set includes four hooks that should be attached to the wall at the optimal height for the user. If we mount the D8 on the top hooks, we can train using the pull-up bar. When mounted on the lower lower hooks, we get exercise handrails and armrests.

Multifunctionality is the main advantage of the D8 2in1. With the help of a pull-up bar and exercise handrails and arm rests, we can work on multiple muscles of the entire body: arms, back, abdomen and chest.

BenchK provides a 10-year warranty on all BenchK D8 metal components.

The design is reserved by the right of registration of the Community design.

Specifications

Wide grip dimension: 115 cm/45⁹⁄_32″
Narrow grip dimension: 55 cm/21²¹⁄_32″
Distance from a wall as a pull up bar: 50 cm/19¹¹⁄_16″
Distance from a wall as a dip bar: 80 cm/31¹⁄_2″
Maximum user weight: 150 kg/ 330 lbs
Weight: 14 kg/31 lbs
Colour: black
Material: metal
Warranty for metal elements: 10 years

Assembly Instructions

A holder consists of a profile 50x40mm//1³¹⁄_32″ x 1³⁷⁄_64″ and is 2mm/⁵⁄_64″ thick, powder-coated in black matt. Both professionals and amateurs can train comfortably on it.

The holder includes a metal loop Ø10 for a punching bag. The holder in placed on the wall bars’ rungs using hooks, allowing you to adjust its height or remove it. The hooks are covered with felt to prevent the structure from rubbing against the wall bars’ rungs.

The accessory is designed to be mounted on wall bar Series 2 and 7.

The maximum weight of the punching bag attached to the BenchK BBHW is 100kg/ 220 lbs.

*The punching bag in the photos in not included with the product.

Specifications

Maximum punching bag weight: 100 kg /220 lbs
Holder length: 90 cm/ 35 ½″
Dimensions: 99 cm x 76 cm x 47 cm/ 39” x 30” x 18 ½”
Weight: 8 kg/ 17,5 lbs
Colour: white matt
Method of attachment: Wall bars Series 2 and 7
Material: steel
Warranty for metal elements: 10 years

Exercise Video

A holder consists of a profile 50x40mm//1³¹⁄_32″ x 1³⁷⁄_64″ and is 2mm/⁵⁄_64″ thick, powder-coated in black matt. Both professionals and amateurs can train comfortably on it.

The holder includes a metal loop Ø10 for a punching bag. The holder in placed on the wall bars’ rungs using hooks, allowing you to adjust its height or remove it. The hooks are covered with felt to prevent the structure from rubbing against the wall bars’ rungs.

The accessory is designed to be mounted on wall bar Series 2 and 7.

The maximum weight of the punching bag attached to the BenchK BBHB is 100kg/ 220 lbs.

*The punching bag in the photos in not included with the product.

Specifications

Maximum punching bag weight: 100 kg /220 lbs
Holder length: 90 cm/ 35 ½″
Dimensions: 99 cm x 76 cm x 47 cm/ 39” x 30” x 18 ½”
Weight: 8 kg/ 17,5 lbs
Colour: black matt
Method of attachment: Wall bars Series 2 and 7
Material: steel
Warranty for metal elements: 10 years

Exercise Video

BenchK PB2 has been designed for BenchK 7 series. It is permanently mounted to the top of the wall bar. The pull up bar has six non-slip handles, which make exercising more varied and easier.

The use of modern technology has allowed us to create a uniform product. Additional support is made of 4 mm/0⁵⁄_32″ thick metal. The main frame is made of rectangular profile, 50 x 40 mm/1³¹⁄_32″ x 1³⁷⁄_64″ , and a pipe of 27,2 mm/10⁴⁵⁄_64″ diameter (2 mm thick/0⁵⁄_64″). All metal elements have been powder coated white matte. The precision and ideal shapes have been achieved thanks to modern technologies of welding and laser cutting.

The pull up bar is compatible with BenchK 700 and BenchK 200 wall bars.

Specifications

Maximum user weight: 150 kg/330 lbs
Width: 116,4 cm/45⁵³⁄_64″
Weight: 7 kg/15 lbs
Colour: white
Material: steel, polyurethane
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Exercise Video

BenchK PB2 available in black and white has been designed for BenchK series 7. It is permanently fixed to the top of the wall bars. The pull up bar has six non-slip handles, which make exercising more varied and easier.

The use of modern technology has allowed us to create a uniform product. Additional support is made of 4 mm thick steel. The main frame is made of rectangular profile, 50 x 40 mm/1³¹⁄_32″ x 1³⁷⁄_64″ , and a pipe of 27,2 mm/10⁴⁵⁄_64″ diameter (2 mm thick/0⁵⁄_64″). All steel elements have been powder coated matte. The precision and ideal shapes have been achieved thanks to modern technologies of welding and laser cutting.

Specifications

Maximum user weight: 150 kg/330 lbs
Width: 116,4 cm/45⁵³⁄_64″
Weight: 7 kg/15 lbs
Colour: black/white
Material: steel, polyurethane
Warranty for steel elements: 10 years
Warranty for other elements: 2 years

Exercise Video

The BenchK RECOIL  comes complete with Lashing Strap. The Lashing Strap can be attached to bars, racks or even tree branches, providing the perfect anchor point for your RECOIL. Setup is easy and takes just a few seconds. Ideal for workouts on the go

HEAD TO TOE ADJUSTMENT: RECOIL  has the largest primary adjustment range on the market. The straps can be adjusted all the way from head to toe and everywhere in between

PUSH BUTTON ADJUSTMENT: The quickest and easiest strap length adjustment of any suspension trainer. Straps adjust simultaneously to any length with the push of a button

EASY ADJUST FOOT STRAPS: The foot straps can be quickly adjusted to the exact size of your feet while your feet are already in place. Simply slide the handle down onto your foot for a nice snug fit, then slide it up again when you’re finished. This takes away any guess work and makes it super easy to get your feet in and out. The foot straps are extremely comfortable for those who prefer to exercise barefoot.

DURABLE RUBBER GRIPS: All RECOIL’s come with non-slip, textured rubber grips as standard. Comfortable, hygienic and made to last

USER-FRIENDLY DESIGN: RECOIL’s Patented design is compact, portable and efficient to use. Workout virtually anywhere without the hassle of busy gyms or expensive memberships

TIDY AND TANGLE FREE: The entire strap length is stored inside the device with only the required length extracted during use. There are no annoying loose ends that can become tangled.

Specifications

• Size: 13 x 11x 8.5cm/5 x 4.5 x 3.5inch
• Weight: 1.5kg/3.3lbs
• Max User Weight: 150kg/330lbs

What's Included

• Recoil
• Lashing Strap
• User’s Guide

Instructions

Gymnastic mattress comprises of 3 soft square mattresses joined together. The mattress is covered in eco leather in grey. It is suitable for all gymnastic exercises.

The mattress contains eco materials only and does not have a smell. It provides safety during play and exercise on the BenchK wall bar. Its neutral colour will perfectly match your child’s bedroom. It can also be used as a seat for a child. When not in use, it can be placed on top of the pull up bar to save space.

Specifications

Length: 180 cm/70⁵⁵⁄_64″
Width: 60 cm/23⁵⁄_8″
Thickness: 8 cm/3⁵⁄_32″
Weight: 5,5 kg/12 lbs
Cover: 100% eco leather
Colour: gray
Filling: polyurethane foam, thickness R50
Warranty: 2 years
Washing instructions: Do not machine wash. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean.

Gymnastic mattress comprises of 3 soft square mattresses joined together. The mattress is covered in eco leather in brown. It is suitable for all gymnastic exercises.

The mattress contains eco materials only and does not have a smell. It provides safety during play and exercise on the BenchK wall bar. Its neutral colour will perfectly match your child’s bedroom. It can also be used as a seat for a child. When not in use, it can be placed on top of the pull up bar to save space.

Specifications

Length: 180 cm/70⁵⁵⁄_64″
Width: 60 cm/23⁵⁄_8″
Thickness: 8 cm/3⁵⁄_32″
Weight: 5,5 kg/12 lbs
Cover: 100% eco leather
Colour: brown
Filling: polyurethane foam, thickness R50
Warranty: 2 years
Washing instructions: Do not machine wash. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean.

Exclusively for use with BenchK 2, 5, 7  Series wall bars, these wall holders are highly recommended for ensuring the most stable, secure installation possible in case of the wooden studs wall construction. Each wall holder is made in Poland from laser-cut and formed steel brackets. Within the pair, one holder is used to mount the top of the BenchK wall bars and the other for the bottom.

The wall holders for the BenchK wall bars are designed with special pre-cut slots, allowing users to mount them to a standard wood stud wall (2 studs required for installation and 8 screws that have to be purchased separately). Thanks to the with of the pre-cut slots, the holders can be adjusted to the distance between the wooden studs. Remember that the Fischer plugs and screws are not suitable for wood installation.

A well-known German manufacturer of fastening systems offers DUOPOWER pins – which guarantee very good fixing thanks to the use of 2 components: depending on the base material, the gray element made of high-quality nylon automatically activates the optimal holding function (expanding, folding, rolling) for the best fixing.

The spreader wings of the red element provide expansion and additional protection of the gray element. Easily screwed in and tightened at the end. No risk of over-tightening the pin. The molded edge of the pin prevents it from falling into the hole.

Advantages

• Two different components allow for the highest load-bearing capacities and intelligent operation in different types of ground.
• Good feeling when the pin is fully extended. You can feel the exact moment when the pin is properly fitted.
• A small collar on the periphery of the plug prevents it from falling into the hole during assembly.
• Serrated shape on the side of the plug prevents it from turning during assembly.
• Increased anchoring depth makes the plug particularly suitable for fixing in hollow blocks, aerated concrete and plastered walls.

Assembly instructions and operation.

When required, most assemblies are relatively easy to perform. Some require a higher skill level.

If you prefer not to handle the setup, you may outsource this task to our trusted partners anywhere in the USA. Contact Us for details.

• DUOPOWER pins are suitable for both pre-assembly and push-through assembly.
• The combination of two different materials of the dowel affects their various properties (expansion, folding and looping), which allows the use of additional substrates and obtaining the highest load capacity in them.
• The required screw length results from the length of the plug + thickness of the fastened element + 1x screw diameter.
• Wood screws, chipboard screws and hanger bolts can be used for the dowels.
• In the case of fastening to board materials, the unthreaded part of the screw must not be longer than the thickness of the fastened element.
• It is not recommended to use when the thickness of the wall is less than 12 cm (4,7″).

Instructions (Manual & Video)

See/Download the manual

View our Instruction Video

Specifications

Wall holder:
Dimensions: 66cm x 10cm x 10cm (25,9”x 3,9” x 3,9”)
Weight: 4 kg (8,8 lbs)
Color: white matt
Material: steel
Warranty for steel elements: 10 years

S8
8 sets (screw and plastic cover)
Minimum wall thicnkess is 12 cm

Use only when the wall is solid:
Concrete Solid bricks
Solid silicate bricks
Aerated concreto
Bricks with vertical perforation
Perforated silicate bricks
Plasterboard
Gypsum plasterboards and gypsum fiber boards
Light concrete hollow block blocks
Hollow-core slabs of brick and concrete or the like
Natural stone
Particle boards
Full gypsum boards

Exclusively for use with BenchK 2, 5, 7  Series wall bars, these wall holders are highly recommended for ensuring the most stable, secure installation possible in case of the wooden studs wall construction. Each wall holder is made in Poland from laser-cut and formed steel brackets. Within the pair, one holder is used to mount the top of the BenchK wall bars and the other for the bottom.

The wall holders for the BenchK wall bars are designed with special pre-cut slots, allowing users to mount them to a standard wood stud wall (2 studs required for installation and 8 screws that have to be purchased separately). Thanks to the with of the pre-cut slots, the holders can be adjusted to the distance between the wooden studs. Remember that the Fischer plugs and screws are not suitable for wood installation.

A well-known German manufacturer of fastening systems offers DUOPOWER pins – which guarantee very good fixing thanks to the use of 2 components: depending on the base material, the gray element made of high-quality nylon automatically activates the optimal holding function (expanding, folding, rolling) for the best fixing.

The spreader wings of the red element provide expansion and additional protection of the gray element. Easily screwed in and tightened at the end. No risk of over-tightening the pin. The molded edge of the pin prevents it from falling into the hole.

Advantages

• Two different components allow for the highest load-bearing capacities and intelligent operation in different types of ground.
• Good feeling when the pin is fully extended. You can feel the exact moment when the pin is properly fitted.
• A small collar on the periphery of the plug prevents it from falling into the hole during assembly.
• Serrated shape on the side of the plug prevents it from turning during assembly.
• Increased anchoring depth makes the plug particularly suitable for fixing in hollow blocks, aerated concrete and plastered walls.

Assembly instructions and operation.

When required, most assemblies are relatively easy to perform. Some require a higher skill level.

If you prefer not to handle the setup, you may outsource this task to our trusted partners anywhere in the USA. Contact Us for details.

• DUOPOWER pins are suitable for both pre-assembly and push-through assembly.
• The combination of two different materials of the dowel affects their various properties (expansion, folding and looping), which allows the use of additional substrates and obtaining the highest load capacity in them.
• The required screw length results from the length of the plug + thickness of the fastened element + 1x screw diameter.
• Wood screws, chipboard screws and hanger bolts can be used for the dowels.
• In the case of fastening to board materials, the unthreaded part of the screw must not be longer than the thickness of the fastened element.
• It is not recommended to use when the thickness of the wall is less than 12 cm (4,7″).

Instructions (Manual & Video)

See/Download the manual

View our Instruction Video

Specifications

Wall holder:
Dimensions: 66cm x 10cm x 10cm (25,9”x 3,9” x 3,9”)
Weight: 4 kg (8,8 lbs)
Color: black matt
Material: steel
Warranty for steel elements: 10 years

S8
8 sets (screw and plastic cover)
Minimum wall thicnkess is 12 cm

Use only when the wall is solid:
Concrete Solid bricks
Solid silicate bricks
Aerated concreto
Bricks with vertical perforation
Perforated silicate bricks
Plasterboard
Gypsum plasterboards and gypsum fiber boards
Light concrete hollow block blocks
Hollow-core slabs of brick and concrete or the like
Natural stone
Particle boards
Full gypsum boards

The adjustable wooden pull up bar can be used to exercise shoulder and back muscles as well as work out using resistance straps such as TRX. BenchK PB204 pull up bar is made of beech wood and hand oiled with oil that is safe for food handling environments.

The high quality of manufacturing rules out any sharp edges or protruding elements. The natural materials used do not cause allergic reactions.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Maximum user weight: 120 kg (265 lbs)
Weight: 6 kg (13,2 lbs)
Color: light beech
Material: solid beech wood, beech plywood
Warranty: 2 years

Assembly Instructions

Removable wooden pull up bar can be placed at different heights, which allows for engaging different muscle groups. A well thought through mounting system guarantees safety. If needed, the pull up bar can be easily removed.

The product is made from beech wood and its every element is hand oiled with two layers of organic oil, based on linseed oil which is approved for contact with food. The oil used is natural an anti-allergic.

Its smart design takes into account the user needs. The pull up bar does not have any sharp edges or protruding elements.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Maximum user weight: 120 kg/265 lbs
Weight: 6 kg/13 lbs
Colour: oak
Material: beech wood
Warranty: 2 years

Assembly Instructions

Exclusively for use with wooden BenchK 1 Series wall bars, these wall holders are highly recommended for ensuring the most stable, secure installation possible in case of the wooden studs wall construction. Each wall holder is made in Poland from laser-cut and formed steel brackets. Within the pair, one holder is used to mount the top of the BenchK wall bars and the other for the bottom.

The wall holders for the BenchK wall bars are designed with special pre-cut slots, allowing users to mount them to a standard wood stud wall (2 studs required for installation and 4 screws that have to be purchased separately). Thanks to the with of the pre-cut slots, the holders can be adjusted to the distance between the wooden studs. Remember that the Fischer plugs and screws available at www.benchk.us are not suitable for wood installation.

A well-known German manufacturer of fastening systems offers DUOPOWER pins – which guarantee very good fixing thanks to the use of 2 components: depending on the base material, the gray element made of high-quality nylon automatically activates the optimal holding function (expanding, folding, rolling) for the best fixing.

The spreader wings of the red element provide expansion and additional protection of the gray element. Easily screwed in and tightened at the end. No risk of over-tightening the pin. The molded edge of the pin prevents it from falling into the hole.

Advantages

• Two different components allow for the highest load-bearing capacities and intelligent operation in different types of ground.
• Good feeling when the pin is fully extended. You can feel the exact moment when the pin is properly fitted.
• A small collar on the periphery of the plug prevents it from falling into the hole during assembly.
• Serrated shape on the side of the plug prevents it from turning during assembly.
• Increased anchoring depth makes the plug particularly suitable for fixing in hollow blocks, aerated concrete and plastered walls.

Assembly instructions and operation.

• DUOPOWER pins are suitable for both pre-assembly and push-through assembly.
• The combination of two different materials of the dowel affects their various properties (expansion, folding and looping), which allows the use of additional substrates and obtaining the highest load capacity in them.
• The required screw length results from the length of the plug + thickness of the fastened element + 1x screw diameter.
• Wood screws, chipboard screws and hanger bolts can be used for the dowels.
• In the case of fastening to board materials, the unthreaded part of the screw must not be longer than the thickness of the fastened element.
• It is not recommended to use when the thickness of the wall is less than 12 cm (4,7″).

Specifications

Wall holder:
Dimensions: 58cm x 6cm x 12cm / 22,8”x 2,3” x 4,7”
Weight:  2 kg (4,4 lbs)
Color: black matt
Material: steel
Warranty for steel elements: 10 years

S4
4 sets (screw and plastic cover)
Minimum wall thickness is: 12cm
Use with BenchK 1 series

Use only when the wall is solid:
Concrete
Solid bricks
Solid silicate bricks
Aerated concreto
Bricks with vertical perforation
Perforated silicate bricks
Plasterboard
Gypsum plasterboards and gypsum fiber boards
Light concrete hollow block blocks
Hollow-core slabs of brick and concrete or the like
Natural stone
Particle boards
Full gypsum boards
For stud frame wall construction do not use plastic plugs

Assembly instructions

Gymnastic accessories will inspire to take up new challenges and physical activities. The set includes:

• pair of gymnastic rings
• climbing rope with a wooden swing

The accessories can be used by a person of up to 80 kg/176 lbs of weight.

The rings are made of beech plywood and are hung on black straps. Polished to perfection, the rings are smooth and safe for the hands. The straps are equipped with a buckle that allows for quick length adjustment as well as easy removal. Any excess strap can be fastened by a velcro strip. Once the child grows, the rings can be used as a TRX strap.

The rope is manually tangled in the upper section to loop form and secured at the very bottom, eliminating the need for metal and plastic elements. It can be used for climbing, or as a swing.

The rings and swing are hand oiled with two layers of organic oil, based on linseed oil which is approved for contact with food.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Maximum user weight of each accessory: 80 kg (176 lbs)
Strap width: 2,5 cm (1″)
Strap length: 210 cm (82 ⁴³/₆₄”)
Inner diameter of the rings: 10,8 cm (4 ¹/₄”)
Outer diameter of the rings: 14,7 cm (5 ²⁵/₃₂”)
Swing diameter: 30 cm (11 ¹³/₁₆”)
Swing diameter: 30 cm (11 ¹³/₁₆”)
Accessories total weight: 3 kg (6lbs )
Color: light beech
Material: beech plywood
Warranty: 2 years
Important: Please check if the strap buckles are securely fastened before using the gymnastic rings. The product can only be used and is compatible with BenchK ladders.

Assembly Instructions

Gymnastic accessories will inspire to take up new challenges and physical activities.

The accessory set includes:

• pair of gymnastic rings
• climbing rope with a wooden swing

The accessories can be used by a person of up to 80 kg of weight/176 lbs.

The rings are made of beech plywood and are hung on black straps. Polished to perfection, the rings are smooth and safe for the hands. The straps are equipped with a buckle that allows for quick length adjustment as well as easy removal. Any excess strap can be fastened by a velcro strip. Once the child grows, the rings can be used as a TRX strap.

The rope is manually tangled in the upper section to loop form and secured at the very bottom, eliminating the need for metal and plastic elements. It can be used for climbing, or as a swing.

The rings and swing are hand oiled with two layers of organic oil, based on linseed oil which is approved for contact with food.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Strap width: 2,5 cm/1″
Strap length: 210 cm/82 ⁴³/₆₄”
Inner diameter of the rings: 10,8 cm/4 ¹/₄”
Outer diameter of the rings: 14,7 cm/5 ²⁵/₃₂”
Swing diameter: 30 cm/11 ¹³/₁₆”
Maximum user weight of each accessory: 80 kg/176 lbs
Accessories total weight: 2 kg/4.4 lbs
Warranty: 2 years
Important: Please check if the strap buckles are securely fastened before using the gymnastic rings.

Assembly Instructions

Made of beech wood and hand oiled to the highest standard, this accessory, when placed on top of the pull up bar, creates a stylish and functional desk. When the pull up bar is placed on one of the lower rungs it will serve as a table for the youngest ones. When raised, it makes a perfect standing desk for a working adult.

The desk is space saving, looks stylish and fits perfectly into minimalist interiors. It is a great addition to wall bar and together they create a workout corner and a home desk.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Dimensions: 62 cm x 58 cm x 2 cm (24²⁄_5″ x 22⁴⁄₅” x 0⁴⁄₅“)
Weight: 6 kg/13.2 lbs
Warranty: 2 years

Assembly Instructions

Made of beech wood and hand oiled to the highest standard, this accessory, when placed on top of the pull up bar, creates a stylish and functional desk. When the pull up bar is placed on one of the lower rungs it will serve as a table for the youngest ones. When raised, it makes a perfect standing desk for a working adult.

The desk is space saving, looks stylish and fits perfectly into minimalist interiors. It is a great addition to BenchK wall bars and together they create a workout corner and a home desk.

The bench top can only be used together with the PB 076 pull up bar.

Both the colors of individual wooden elements and the colors in the images may differ slightly from those in reality due to the nature of the wood. Nevertheless, we make special efforts to keep these differences to a minimal.

Specifications

Dimensions: 62 cm x 58 cm x 2 cm/(24²⁄_5″ x 22⁴⁄₅” x 0⁴⁄₅“)
Weight: 6 kg/13 lbs
Warranty: 2 years

Assembly Instructions

A well-known German manufacturer of fastening systems offers DUOPOWER pins – which guarantee very good fixing thanks to the use of 2 components: depending on the base material, the gray element made of high-quality nylon automatically activates the optimal holding function (expanding, folding, rolling) for the best fixing.

The spreader wings of the red element provide expansion and additional protection of the gray element. Easily screwed in and tightened at the end. No risk of over-tightening the pin. The molded edge of the pin prevents it from falling into the hole.

The set consisting of 12 sets (dowel with screw) is used in the following series:

• BenchK 7

Advantages

• Two different components allow for the highest load-bearing capacities and intelligent operation in different types of ground.
• Good feeling when the pin is fully extended. You can feel the exact moment when the pin is properly fitted.
• A small collar on the periphery of the plug prevents it from falling into the hole during assembly.
• • Serrated shape on the side of the plug prevents it from turning during assembly.
• Increased anchoring depth makes the plug particularly suitable for fixing in hollow blocks, aerated concrete and plastered walls.

Application

• Concrete
• Solid bricks
• Solid silicate bricks
• Aerated concrete
• Bricks with vertical perforation
• Perforated silicate bricks
• Plasterboard
• Gypsum plasterboards and gypsum fiber boards
• Light concrete hollow block blocks
• Hollow-core slabs of brick and concrete or the like
• Natural stone
• Particle boards
• Full gypsum boards

Solid bricks made of lightweight concrete

Assembly instructions and operation.

• DUOPOWER pins are suitable for both pre-assembly and push-through assembly.
• The combination of two different materials of the dowel affects their various properties (expansion, folding and looping), which allows the use of additional substrates and obtaining the highest load capacity in them.
• The required screw length results from the length of the plug + thickness of the fastened element + 1x screw diameter.
• Wood screws, chipboard screws and hanger bolts can be used for the dowels.
• In the case of fastening to board materials, the unthreaded part of the screw must not be longer than the thickness of the fastened element.
• It is not recommended to use when the thickness of the wall is less than 12 cm (4,7″).

Assembly instructions (Video)

Specifications

A well-known German manufacturer of fastening systems offers DUOPOWER pins – which guarantee very good fixing thanks to the use of 2 components: depending on the base material, the gray element made of high-quality nylon automatically activates the optimal holding function (expanding, folding, rolling) for the best fixing.

The spreader wings of the red element provide expansion and additional protection of the gray element. Easily screwed in and tightened at the end. No risk of over-tightening the pin. The molded edge of the pin prevents it from falling into the hole.

The set consisting of 8 sets (dowel with screw) is used in the following series:

• BenchK 1
• BenchK 2
• BenchK 5

We invite you to watch the instructional video

Advantages

• Two different components allow for the highest load-bearing capacities and intelligent operation in different types of ground.
• Good feeling when the pin is fully extended. You can feel the exact moment when the pin is properly fitted.
• A small collar on the periphery of the plug prevents it from falling into the hole during assembly.
• Serrated shape on the side of the plug prevents it from turning during assembly.
• Increased anchoring depth makes the plug particularly suitable for fixing in hollow blocks, aerated concrete and plastered walls.

Application

• Concrete
• Solid bricks
• Solid silicate bricks
• Aerated concrete
• Bricks with vertical perforation
• Perforated silicate bricks
• Plasterboard
• Gypsum plasterboards and gypsum fiber boards
• Light concrete hollow block blocks
• Hollow-core slabs of brick and concrete or the like
• Natural stone
• Particle boards
• Full gypsum boards

Solid bricks made of lightweight concrete

Assembly instructions and operation.

• DUOPOWER pins are suitable for both pre-assembly and push-through assembly.
• The combination of two different materials of the dowel affects their various properties (expansion, folding and looping), which allows the use of additional substrates and obtaining the highest load capacity in them.
• The required screw length results from the length of the plug + thickness of the fastened element + 1x screw diameter.
• Wood screws, chipboard screws and hanger bolts can be used for the dowels.
• In the case of fastening to board materials, the unthreaded part of the screw must not be longer than the thickness of the fastened element.
• It is not recommended to use when the thickness of the wall is less than 12 cm (4,7″).

Assembly instructions (Video)

Specifications