Mounting

Before purchasing and installing the BenchK wall bar please check
– height of the room – the minimum height of the room for installing the wall bar should be 10 cm higher than the height of the wall bar itself, in the case of a wall bar with a pull-up bar, make sure that the distance from the pull up bar to the ceiling is approx. 25 cm/9,8″, which will allow you to do the pull-ups freely,
– type of wall – mounting is not possible to plasterboard, OSB, etc. walls.

Each BenchK gymnastic wall bar is designed to be mounted to the wall. Additionally, the BenchK 5 series wall bars offer two mounting options:
– to the wall
– expansion floor-ceiling.
Both ways are equally safe. One mounting method should be selected. The decision and responsibility for the wall bar mounting method rests with the customer.
The obligatory wall thickness in the case of installation with the use of Fischer expansion bolts available from BenchK is 12 cm/4,7″. In other cases, it is only a recommendation.

A paper assembly instruction is included with each product. There is a QR code in the top right corner of each instruction that redirects you to the video instruction.

The technical drawing of the BenchK wall bar is included in each PDF manual